This device is consisted of a tap chuck and tap collets. The chuck has compensating device for thread pich. Collet chuck has overload torque protection device, which avoid tap breaking. In order to get the diteren release torques for different diameter taps, just adjust nuts. This device is most applicable to tap working on drill, lathe, boring machine, milling machine and CNC machine center and so on.
| Order No. | Shank taper | D | D1 | d | L1 | L | Tapping range | Torque Nm | Wt(kg) |
| J4112-MS2 | MS2 | 46 | 17.780 | 19 | 75 | 171.5 | M3-M12 | 25 | 1.08 |
| J4112-MS3 | MS3 | 23.825 | 94 | 191 | 1.28 | ||||
| J4112-MS4 | MS4 | 31.267 | 117.5 | 216 | 3.00 | ||||
| J4116-R8 | R8 | 31.750 | 101.6 | 193.6 | M3-M16 | 46.3 | 1.71 | ||
| J4116-MS2 | MS2 | 17.780 | 75 | 171.5 | 1.08 | ||||
| J4116-MS3 | MS3 | 23.825 | 94 | 191 | 1.61 | ||||
| J4116-MS4 | MS4 | 31.267 | 117.5 | 216 | 3.00 | ||||
| J4124-MS3 | MS3 | 30 | 23.825 | 30 | 94 | 227 | M12-M24 | 150 | 3.20 |
| J4124-MS4 | MS4 | 31.267 | 117.5 | 252 | 3.60 | ||||
| J4124-MS5 | MS5 | 44.399 | 149.5 | 284 | 4.50 | ||||
| 12 Tapping range | M3 | M4 | M5 | M6 | M8 | M10 | M12 | ||
| 67 Type d1 x a (mm) | 4 x 3 | 4 x 3 | 5 x 3.8 | 6 x 5 | 6 x 5 | 8 x 6.3 | 9 x 7.1 | ||
| 83 Type d1 x a (mm) | 2.24 x 1.8 | 3.15 x 2.5 | 4 x 3.15 | 4.5 x 3.55 | 6.3 x 5 | 8 x 6.3 | 9 x 7.1 | ||
| 24 Tapping range | M12 | M14 | M16 | M18 | M20 | M22 | M24 | ||
| 67 Type d1 x a (mm) | 9 x 7.1 | 10.5 x 8 | 12.5 x 10 | 14 x 11 | 16 x 12 | 18 x 14.5 | 20 x 16 | ||
| 83 Type d1 x a (mm) | 9 x 7.1 | 11.2 x 9 | 12.5 x 10 | 14 x 11.2 | 14 x 11.2 | 16 x 12.5 | 18 x 14 |
Other Products
Tungsten steel DE1 hard alloy top MS1 MT1 Mohs MS2 MT3 4 5 high-precision DE2 Mohs DE3
Tungsten steel DE1 hard alloy top MS1 MT1 Mohs MS2 MT3 4 5 high-precision DE2 Mohs DE3
ERH groove water stop cylinder clamp center cold water mechanical elastic jacket ER16 20 25 40 chuck
ERH groove water stop cylinder clamp center cold water mechanical elastic jacket ER16 20 25 40 chuck
NC E2 type VDI tool holder For boring bars with cylindrical shank
NC E2 type VDI tool holder
CNC lathe tool sleeve inner hole turning tool rod variable diameter sleeve D25D32D40
CNC lathe tool sleeve inner hole turning tool rod variable diameter sleeve D25D32D40
Navigation
Navigation
Contact Us
Tel: +86 534 425 1888
Mob/ Wechat: +86 137 9138 1619
E-mail: jacksun@ht-tools.net
WhatsApp: +86 137 9138 1619
Add.:East Area of Economic Development Area, Pingyuan County, Shandong Province. China 253100
Send in Inquiry
Send in Inquiry
