Material: 65Mn
Hardness: clamping part HRC55-60elastic part HRC40-45
This unit is applicable to all sorts of milling machines, which spindle taper hole is R8, such as X6325, X5325 etc.
Product Details
| HT-0011 | R8 COLLET | |||
| Order No. | Type | Clamping range | In | Wt(kg) |
| mm | ||||
| R8-01-d | Round | 1-20 | 1/16-7/8 | 0.24 |
| R8-02-S | Square | 3-13 | 1/8-1/2 | 0.24 |
| R8-03-H | Hex | 3-16 | 1/8-5/8 | 0.24 |
| Inspection of Accuray | ||||
| d | L | Run out | ||
| mm | in | mm | in | mm |
| 1-1.6 | 1/32-1/16 | 6.35 | 0.0005 | 0.013 |
| >1.6-3 | >1/16-1/8 | 12.7 | 0.0005 | 0.013 |
| >3-10 | >1/8-3/8 | 25.4 | 0.0005 | 0.013 |
| >10-16 | >3/8-5/8 | 38.1 | 0.0005 | 0.013 |
| >16-20 | >5/8-7/8 | 50.8 | 0.0005 | 0.013 |
Other Products
Used for boring, milling, drilling, tapping, grinding and engraving operation, etc.
The collet does not have an elastic shrinkage range, emphasizing the clamping force
Navigation
Navigation
Contact Us
Tel: +86 534 425 1888
Mob/ Wechat: +86 137 9138 1619
E-mail: jacksun@ht-tools.net
WhatsApp: +86 137 9138 1619
Add.:East Area of Economic Development Area, Pingyuan County, Shandong Province. China 253100
Send in Inquiry
Send in Inquiry
