With overload protection device inside the chucks toraue adiustable
Show the specification in the order, with diameter of shank in the form as 19-3.5 x 2.7-ll
| 型号 Modle Dxa | d ( mm) | DIN371 | DIN374 | DIN376 | |
| 3.5×27 | 19 | M3 | M5 | M5 | |
| 4×3 | M3.5 | ||||
| 4.5×3.4 | M4 | M6 | |||
| 6×4.9 | M5 | ||||
| 6×4.9 | M6 | ||||
| 6×4.9 | M8 | M8 | |||
| 7×5.5 | 31 | M10 | M10 | ||
| 8×6.2 | M8 | ||||
| 9×7 | M12 | M12 | |||
| 10×8 | M10 | M13 | M13 | ||
| 11×9 | 48 | M14 | M14 | ||
| 12×9 | M16 | M16 | |||
| 14×11 | M18 | M18 | |||
| 16×12 | M20 | M20 | |||
| 18×14.5 | M22 | M22 | |||
| 18×14.5 | M24 | M24 | |||
| 20×16 | M27 | M27 | |||
| 22×18 | M30 | M30 | |||
| 25×20 | M33 | M33 | |||
| 28×22 | M36 | M36 | |||
Other Products
This unit is used for boring,milling,drilling,tapping,grinding and engraving operation etc.
Used for boring, milling, drilling, tapping, grinding and engraving operationetc.
5c Collet Square Hex 5C Collet Chuck For Lathe
This unit is applicable to all sorts of lathes, which spindle taper hole is 5C, such as automatic lathes, CNC lathes etc.
Navigation
Navigation
Contact Us
Tel: +86 534 425 1888
Mob/ Wechat: +86 137 9138 1619
E-mail: jacksun@ht-tools.net
WhatsApp: +86 137 9138 1619
Add.:East Area of Economic Development Area, Pingyuan County, Shandong Province. China 253100
Send in Inquiry
Send in Inquiry
